代表性论文

2014

·Inter-jet Distance in Needleless Melt Differential Electrospinning with Umbellate Nozzles. 2014

·Effect of gate size on the melt filling behavior and residual stress of injection molded parts. 2014

·Polypropylene fibers fabricated via a needleless melt- electrospinning device for marine oil-spill cleanup 2014

2013

·Tug of war effect in melt electrospinning .2013

·Performance assessment in a tube with rotor–assembled strands mixed by spiral slot rotor and low flow resistance rotor. 2013

·Simulation of Circular Tubes Fitted With V Cut and Square Cut Rotors. 2013

·Differential Molding System for Micro Injection Molding of Thermoplastics. 2013

·Numerical study on thermo-hydraulic characteristics of turbulent flow in acircular tube fitted with helical blade rotors. 2013

·Heat transfer enhancement in the tube fitted with LefteRight helical blade rotors. 2013

·Heat transfer enhancement in a tube fitted with helical blade rotors with grooves. 2013

·Performance assessment in a tube with rotor–assembled strands mixed by spiral slot rotor and low flow resistance rotor..2013

2012

·Heat transfer enhancement in double-pipe heat exchanger by means of rotor-assembled strands . 2012

·Orthogonal Design Study on Factors Affecting the Degradation of Polylactic Acid Fibers of Melt Electrospinning. 2012

2011

·Heat transfer and friction characteristics of turbulent flow through plain tube inserted with rotor-assembled strands . 2011

·Filling-To-Packing Switchover Mode Based on Cavity Temperature for Injection Molding. 2011

·Dissipative particle dynamics simulation on the fiber dropping process of melt electrospinning. 2011

·Gas barrier and morphology characteristics of linear low-density polyethylene and two different polypropylene films. 2011

·Online measurement of rheological properties of polypropylene based on an injection molding machine to simulate the injection-molding process. 2011

·Development of internal circulation two-platen IMM for thermoplastic polymer.2011

2010

·Online pressure–volume–temperature measurements of polypropylene using a testing mold to simulate the injection-molding process . 2010

·Orthogonal design study on factors effecting on fibers diameter of melt electrospinning. 2010

2009

·On-line testing equipment of P-V-T properties of polymers based on an injection molding machine . 2009

·Multistep Analysis of the Mechanical Performance of an Air spring. 2009

·Melt electrospinning of low density polyethylene having a low melt flow index.2009

2008

·Miscibility, Morphology, Thermal, and Mechanical Properties of a DGEBA based Epoxy Resin Toughened with a Liquid Rubber. 2008

·Multistep analysis of the mechanical performance of an air spring. 2008

Laboratory inverstigation and commercial test for rotors-assembled strand applied in smooth tube. 2008

2007

·An implicit control-volume finite element method and its time step strategies for injection molding simulation. 2007

·Morphology, Dynamic mechanical and thermal studies on poly(styrene-c0-acrylonitrile) modified epoxy resin/galss fiber composites. 2007

2003

·Visual analysis of the flow behavior of core material in a fork portion of plastic sandwich injection molding . 2003