Preparation and Thermal Properties of Phosphorus-containing Copolyester Nanocomposites with Carbon Nanotube |
关键词: |
carbon nanotube phosphorus-containing copolyeste |
类 别: |
橡胶 >> 橡胶原料 |
来 源: |
2009高分子先进制造业论坛(青岛) |
资料类型: |
pdf文件 |
资料大小: |
520K |
简 介: |
Flame retardant nanocomposites were synthesized by melt-blending phosphoruscontaining copolymer (PET-co-DDP) with multi-wall carbon nanotubes. PET-co-DDP was copolymerized with terephthalic acid (TPA), ethylene glycol (EG) and 9, 10-dihydro-10[2, 3-di- (hydroxy carbonyl)propyl]-10-phosphaphenanthrene-10-oxide (DDP). The structure of the nanocomposites was characterized by scan electron microscopy (SEM). Fire property measurements by cone calorimeter revealed that the incorporation of multi wall carbon nanotubes into PET-co-DDP significantly reduced the peak heat release rates compared with the PET-co-DDP. The thermal properties of the nanocomposites were investigated by thermogravimetric analysis (TGA). It was found that the thermal stability of copolyester was improved by the addition of the multi-wall carbon nanotubes. Char formation is the main factor for these improvements. The flame retardant performance was achieved through the formation of a relatively uniform networkstructured floccule layer covering the entire sample surface without any cracks or gaps. This layer re-emitted much of the incident radiation back into the gas phase from its hot surface. |
上传人: |
chem2000 |
上传时间: |
2009-11-02 17:10:47 |
下载次数: |
1 |
消耗积分: |
2 |
我要收藏: |
|
|
友情提示:下载后对该资源进行评论,即可奖励2分。 |
|
本栏目部分资源来自互联网,仅为促进数据共享和信息交流,如有版权问题请告知本网或上传者本人,本网会及时给予答复。 |
报告错误
1.下载无效
2. 资料明显无价值
3. 资料重复存在
|