writer：Chengchao Xiao, Huiyuan Zhang, Huaiyu Zhao, Haoran Xu, Jiameng Huang, and Tao Zhou*
keywords：Mechanism, Liquid metal, Galinstan, Mask-free, Laser ablation, Flexible electronics
source：期刊
specific source：Applied Surface Science, 2022, 605, 154746
Issue time：2022年

This work prepared liquid metal films by roll coating on various flexible substrates and then selectively ablated unwanted areas using near-infrared or ultraviolet lasers. The ablated regions lost their conductivity, while the remaining areas remained highly conductive, resulting in the successful fabrication of high-precision liquid metal circuits on various flexible and stretchable substrates. Mechanism of non-conductivity of liquid metal after laser ablation was investigated in detail. First, under the action of laser, most of Galinstan is evaporated.Second, although very small amounts of liquid metal still remain, they exist in the isolated state and cannot form continuous conductive paths. Finally, a continuous porous network material appears in the residue after laser ablation, which is the non-conductive oxidation products of metallic gallium, indium, and tin. Due to the above three reasons, the liquid metal film after laser ablation can realize the transition from conductive to nonconductive, and the patterning of the liquid metal can be achieved. The application of liquid metal circuits prepared by this method in wearable sensors (electronic skin) was explored. This study contributes to the mechanism of selective laser ablation to fabricate liquid metal circuits, promoting a better understanding of this method in the field of flexible electronics.