作者：Shile Feng, Sijie Wang, Longcheng Gao, Guangjun Li, Yongping Hou,* and Yongmei Zheng*
关键字：Gradient, Controlling, Direction, Adhesion
论文来源：期刊
发表时间：2014年
Controlled directional spreading of a droplet on a smart high-adhesion surface was made possible by simply controlling anodic oxidation. The wettability gradient of the surface was controlled from 0.14 to 3.388mm1 by adjusting the anodic oxidation conditions. When a water droplet made contact with the substrate, the droplet immediately spread in the direction of the wettability gradient but did not move in other directions, such as those perpendicular to the gradient direction, even when the surface was turned upside down. The
spreading behavior was mainly controlled by the wettability gradient. Surfaces with a V- or inverse-V-shaped wettability gradient were also formed by the same method, and two
droplets on these surfaces spread either toward or away from one another as designed. This method could be used to oxidize many conductive substrates (e.g., copper, aluminum) to form surfaces with variously shaped wettability gradients. It has potential for application in microfluidic devices.