【Sensors and Actuators B】Sensing mechanism of the zirconia-based highly selective NO sensor by using a plate-like Cr2O3 sensing electrode
writer:Han Jina; Youju Huang; Jiawen Jian*
keywords:Sensing mechanism
source:期刊
specific source:Sensors and Actuators B 219 (2015) 112–118
Issue time:2015年
Plate-like Cr2O3 has been proved to be highly selective in sensing of nitric oxide (NO), while the sensing response of irregular shape and cubic-like Cr2O3 toward NO was significantly interfered by hydrocarbons (HCs), e.g. C3H6. In this paper, sensing mechanism of the plate-like Cr2O3 for selective sensing of NO (against HCs) was studied via crystallographic phase analysis, lattice fringes investigation and evaluation of the catalytic activity (gas-phase catalytic activity & electrochemical catalytic activity). The Cr2O3 samples with plate-like, irregular shape and cubic-like microstructures have been confirmed to be the same crystallographic phase through XRD measurements, however, significant difference in the lattice fringes of these Cr2O3 samples were observed via high-resolution transmission electron microscopy (HRTEM) & selected-area electron diffraction (SAED). The comparison results of catalytic activity for plate-like, irregular shape and cubic-like Cr2O3 indicated that the unique selectivity for the plate-like Cr2O3 was mainly caused by the electrochemical reaction specifically toward NO, which occurred near the interface between plate-like Cr2O3 and zirconia-based electrolyte. (C) 2015 Elsevier B.V. All rights reserved.