作者：Junwei Gu*, Xudong Meng#, Yusheng Tang, Qiang Zhuang and Jie Kong*
关键字：Polymer-matrix composites (PMCs)，Thermal properties，Compression moulding
论文来源：期刊
具体来源：Composites Part A: Applied Science and Manufacturing
发表时间：2017年

Hexagonal boron nitride/polymethyl-vinyl siloxane rubber (hBN/VMQ) dielectric thermally conductive composites were fabricated via kneading followed by hot compression method. The thermally conductive coefficient (λ), thermal diffusion coefficient (α), dielectric constant (ε) and dielectric loss tangent (tanδ) values were all increased with the increasing addition of hBN fillers. When the volume fraction of hBN fillers was 40 vol%, the corresponding λ and α was 1.110 W/mK and 1.174 mm2/s, 6 and 9 times than that of pure VMQ matrix, respectively. The corresponding ε and tanδ was 3.51 and 0.0054, respectively. Furthermore, the tensile strength and THeat-resistance index (THRI) values were both maximum with 20 vol% hBN fillers, tensile strength of 3.31 MPa, 12 times than that of pure VMQ matrix (0.28 MPa), and THRI of 253.8oC. The obtained hBN/VMQ composites present great potential for packaging in continuous integration and miniaturization of microelectronic devices.

http://dx.doi.org/10.1016/j.compositesa.2016.11.002