Links
Contact Info.
  • Address:陕西省西安市友谊西路127号
  • Zip:710072
  • Tel:029-88431638
  • Fax:
  • Email:nwpugjw@163.com
Current Location :> Home > News > Text
SFPC课题组本征导热高分子材料研究成果发表在J Mater Sci Technol上

Ying Li*, Changdan Gong, Chenggong Li, Kunpeng Ruan, Chao Liu, Huan Liu and Junwei Gu*. Liquid crystalline texture and hydrogen bond on the thermal conductivities of intrinsic thermal conductive polymer films. Journal of Materials Science & Technology, 2021, 82: 250-256.  2019IF=6.155.(1区材料科学Top期刊,中国科技期刊卓越行动计划入选项目-重点期刊类项目)

(https://doi.org/10.1016/j.jmst.2021.01.017)

AbstractPolymer-dispersed liquid crystal (PDLC) films comprising polyvinyl alcohol (PVA) and liquid crystal monomer (LCM) were successfully obtained by the method of solution casting & thermal compressing. LCM was distributed orderly in PVA matrix by hydrogen bond interaction, to form PVA-LCM interpenetrating-layered networks. When the mass fraction of LCM was up to 35 wt%, the corresponding in-plane thermal conductivity coefficient (λ//) of PDLC film was significantly increased to 1.41 W m-1 K-1, about 10.8 times that of neat PVA (0.13 W m-1 K-1). High intrinsic λ// values of PDLC films were mainly attributed to the microscopic-ordered structures formed by ordered stacking of LCM, ordered arrangement of PVA chains, and their hydrogen bond interaction. This work would offer a new way to design and prepare novel intrinsic high thermal conductive polymers.通过溶液浇铸和热压成型工艺将液晶单体(LCM)分散在聚乙烯醇(PVA)基体中,制备了液晶单体聚乙烯醇分散膜(PDLC)。LCM通过氢键作用均匀分散在PVA基体中,形成了PVA-LCM层状互穿网络结构。当LCM的用量达到35 wt%时,PDLC膜的面内导热系数(λ//)高达1.41 W m-1 K-1,约为纯PVA(0.13 W m-1 K-1)的10.8倍。PDLC膜的高λ//主要归因于LCM层叠形成的微观有序结构、PVA分子链的规整排列以及LCM与PVA分子链间的氢键作用力。这项工作为设计和制备本征型高导热高分子材料提供了新的途径。