作者：Qiang Xu, Jun Yang, Jiawei Dai, Yang Yang, Xiaoqiang Chen, Yong Wang*
关键字：polypropylene membrane, atomic layer deposition, hydrohilization
论文来源：期刊
具体来源：J. Membr. Sci.
发表时间：2013年
The uses of porous polypropylene (PP) membranes are limited in water-based separations because of their strong hydrophobicity. To improve the separation performances of polypropylene membranes by hydrophilization, we deposited TiO₂ on their pore surface using the atomic layer deposition strategy with and without a pretreatment to the membrane by plasma. The direct deposition without plasma pretreatment led to slightly enhanced hydrophilicity because TiO₂ was slowly deposited on the membrane as discrete particles due to the lack of active groups on the bare polypropylene surface. In contrast, after a short exposure to plasma generated in air, oxygen-containing active groups were formed on the membrane and subsequent atomic layer deposition yielded conformal thin layer of TiO₂ on the pore walls. The deposited membranes showed remarkably enhanced hydrophilicity and higher deposition cycles led to stronger hydrophilicity. As a consequence of the enhanced hydrophilicity, the permeability and retention of the deposited membrane were simultaneously improved with big amplitudes. For example, an increase in pure water flux of ~ 60% and a more than doubled retention ratio were obtained by deposition of TiO₂ for 150 cycles on the plasma-activated polypropylene membrane. Furthermore, the TiO₂-deposited membranes showed improved resistance to protein fouling compared to unmodified membranes also because of the enhanced hydrophilicity. Such a hydrophilization strategy of plasma pretreatment and subsequent atomic layer deposition of metal oxides is expected to be also effective in the upgrading of performances of other membranes with inert surfaces.