| |
Development and Commercialization of Superfine Fiber spun from a PA6/PE polymer blend and Its Suede
关键字：PA6/PE blend spinning; compatebilizer; superfine fiber; suede; morphological structures
Matrix-fibril blended fibers were produced in different ratios of the PA6 and PE. Depending on the the melt viscosity ratio between PA6 and PE. PA6 can form the disperse phase in the polymer blend even if it is ...
http://www.polymer.cn/research/dis_info5063 |
| |
Effect of initial polymer concentration on the crystallization of poly(vinylidene fluoride)/poly(methyl methacrylate) blend from solution casting
关键字：poly(vinylidene fluoride) (PVDF), poly(methyl methacrylate) (PMMA), crystallization, surface morphology, blend film
Blends of poly(vinylidene fluoride) (PVDF) and poly(methyl methacrylate) (PMMA) are known to be compatible over a wide range of composition , and PVDF can exhibit at least four crystalline phases known as α, β, γ and ...
http://www.polymer.cn/research/dis_info5061 |
| |
POLYMER-ENCAPSULATED CARBON NANOTUBES PREPARED THROUGH ULTRASONICALLY INITIATED IN-SITU EMULSION POLYMERIZATION
关键字：POLYMER,ENCAPSULATED,CARBON,NANOTUBES,PREPARED,THROUGH,ULTRASONICALLY,INITIATED,SITU,EMULSION,POLYMERIZATION,
Carbon nanotubes (CNTs)/polymer composites have attracted much interest because they combine the merits of polymer and carbon nanotubes.
http://www.polymer.cn/research/dis_info3361 |
| |
POLYMER MICELLES AS BUILDING BLOCKS FOR THE INCORPORATION OF AZOBENZENE: ENHANCING THE PHOTOCHROMIC PROPERTIES IN LAYER-BY-LAYER FILMS
关键字：POLYMER,MICELLES,BUILDING,BLOCKS,FOR,THE,INCORPORATION,AZOBENZENE,ENHANCING,THE,PHOTOCHROMIC,PROPERTIES,LAYER,LAYER,FILMS,
Layer-by-layer (LbL) assembly is a powerful method for fabricating polymer nanocomposite films1, 2.Till now, lots of LbL films with various compositions and properties have been developed by changing the building blocks or exploiting d...
http://www.polymer.cn/research/dis_info1848 |
| |
Effects of TLCP Contents on the Thermal and Mechanical Properties of TLCP/UP/GF in-situ Hybrid Composites
关键字：Thermotropic liquid crystalline polymer, Unsaturated polyester, In-situ hybrid composites, Thermal and mechanical properties
In-situ hybrid composites of thermotropic liquid crystalline polymer (TLCP), unsaturated polyester (UP) and glass fiber (GF) have been successfully prepared by melt mixing technology. The thermal and mechanical properties of in-situ composites&n...
http://www.polymer.cn/research/dis_info1569 |
| |
esearch Article Previous Article Next Article Table of Contents Multifunctional Polymer Ligand Interface CdZnSeS/ZnS Quantum Dot/Cy3-Labeled Protein Pairs as Sensitive FRET Sensors
High-quality CdZnSeS/ZnS alloyed core/thick-shell quantum dots (QDs) as energy donors were first exploited in F?rster resonance energy transfer (FRET) applications. A highly efficient ligand-exchange method was used to prepare low toxicity, high quantum yield, stabile, and biocompatible CdZnSeS/ZnS QDs densely capped with multifunctional polymer ligands containing dihydrolipoic acid (DHLA). The re...
http://www.polymer.cnt//ss/yanghy/publicationsshow_13820.html |
| |
【Solid State Lonics】Enhanced cycling performance for all-solid-state lithium ion battery with lifepo4 composite cathode encapsulated by poly (ethylene glycol) (peg) based polymer electrolyte
Abstract:
The poor contact between the cathode and the solid polymer electrolyte (SPE) is one of the primary causes for the low specific capacities of lithium ion batteries. In this work, a composite cathode material containing LiFePO4 nanoparticles encapsulated by PEG-based polymer electrolyte (coated LiFePO4) are prepared in order to increase the interfacial contact area between SPE and cat...
http://www.polymer.cnt//ss/luanshifang/publicationsshow_13516.html |
| |
An indole-based conjugated microporous polymer: a new and stable lithium storage anode with high capacity and long life induced by cation–π interactions and a N-rich aromatic structure
An indole-based conjugated microporous polymer, poly-(bisindolylmaleimide) (PBIM), with superior electrochemical performance as an anode material for LIBs has been obtained by FeCl3-promoted oxidative coupling polymerization. Benefiting from reversible cation–π interactions and a unique aromatic structure containing N heteroatoms, the prepared PBIM anode shows high capacity (1172 mA h g-1, 50 ...
http://www.polymer.cnt//ss/changguanjun/publicationsshow_13359.html |
| |
【Polymer】 Cetyl trimethyl ammonium bromide (CTAB) micellar templates directed synthesis of water-dispersible polyaniline rhombic plates with excellent processability and flow-induced color variation
Well-defined PANI rhombic plates are produced via a cetyl trimethyl ammonium bromide (CTAB) micellar soft template route in low acid environment. Lamellar micelles consisting of CTAB and ammonium persulfate (APS) molecules not only serve as both soft templates and oxidant for oxidative polymerization of aniline, but also provide intermolecular interactions to assemble two-dimensional PANI sh...
http://www.polymer.cnt//ss/zhangqiuyu/publicationsshow_11817.html |
| |
Chen Xu, Ruiyu He, Binbin Xie, Muhammad Ismail, Chen Yao, Jie Luan & Xinsong Li*, Silicone hydrogels grafted with natural amino acids for ophthalmological application ,Journal of Biomaterials Science, Polymer Edition,2016, 27(13): 1354-1368
In this report, protein repelling silicone hydrogels with improved hydrophilicity were prepared by photo-polymerization of silicone-containing monomer and glycidyl methacrylate followed by grafting zwitterionic amino acids. The grafted silicone hydrogels possessed excellent hydrophilic surfaces due to the enrichment of amino acids, which was confirmed by attenuated total reflectance Fourier transf...
http://www.polymer.cnt//ss/lixs/publicationsshow_10411.html |
| |
|