| |
[Macromol. Rapid. Commun.] A simple method to fabricate a conductive polymer micropattern on an organic polymer substrate
Under UV irradiation Plus a photomask, a hydrophilic/hydrophobic hybrid polymer surface is created by sandwiching an ammonium persulfate solution between two polymer films. It is demonstrated that an effective conductive PANT micropattern can be fabricated on such a wettability patterned Surface. For PET, a stable negative micropattern could be formed directly by the selective deposition of...
http://www.polymer.cnt//ss/yangpeng/publicationsshow_2162.html |
| |
Enhancing hydrophilicity and protein resistance of silicone hydrogel by plasma induced grafting with hydrophilic polymer, Chinese Journal of Polymer Science, in press, 2010
.
http://www.polymer.cnt//ss/lixs/publicationsshow_2087.html |
| |
Viscoelastic Interfacial Properties of Compatibilized Polycaprolactone/Polylactide Blend. Journal of Polymer Science Part B: Polymer Physics, 2010, 48, 756-765.
Journal of Polymer Science Part B: Polymer Physics, 2010, 48, 756-765.
ABSTRACT:
Polycaprolactone/polylactide blend (PCL/PLA) is an interesting biomaterial because the two component polymers show good complementarity in their physical properties. However, PCL and PLA are incompatible thermodynamically and hence the interfacial properties act as the important roles controlling the final pro...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1922.html |
| |
Nucleation Effect of Thermotropic Liquid Crystalline Polymer on the Crystallization of Polycaprolactone. Polymers & Polymer Composites, 2010, 18(1), to appear.
Polymers & Polymer Composites, 2010, 18(2), 91-101.
ABSTRACT:
Polycaprolactone (PCL) has attracted much attention in recent years due to its good biodegradability and biocompatibility. As a semicrystalline polymer, the final properties of PCL materials highly depend on the bulk crystallization level. However, PCL shows lower crystallization temperature and rate than other alipha...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1719.html |
| |
Kinetic Study on the Melt Compounding of PP/Multi-Walled Carbon Nanotube Composites. Journal of Polymer Science Part B: Polymer Physics, 2009, 47(3), 608-618.
Journal of Polymer Science Part B: Polymer Physics, 2009, 47(3), 608-618.
ABSTRACT:
The multi-walled carbon nanotubes/polypropylene nanocomposites (PP/CNTs) were prepared by melt mixing using maleic anhydride grafted polypropylene (mPP) as the compatibilizer. The effect of mPP on dispersion of CNTs was then studied using the tool of rheology, aiming at relating the viscoelastic behaviors to the...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1451.html |
| |
Viscoelastic Properties of Polyarylene ether nitriles/Thermotropic Liquid Crystalline Polymer Blend. Journal of Applied Polymer Science, 2008, 108, 1934-1941.
Journal of Applied Polymer Science, 2008, 108, 1934-1941.
ABSTRACT:
Polyarylene ether nitriles (PEN)/thermotropic liquid crystalline polymer (TLCP) blend was prepared via melt mixing. The immiscible phase morphologies, linear and non-linear as well as transient viscoelastic properties of the blend were studied using SEM, rheometer and DMA. The linear dynamic viscoelastic behavior of the blend s...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1445.html |
| |
Morphology Evolution of Nanocomposites Based on PPS/PBT Blend. Journal of Polymer Science Part B: Polymer Physics, 2008, 46, 1265-1279.
Journal of Polymer Science Part B: Polymer Physics, 2008, 46, 1265-1279.
ABSTRACT:
Poly(phenylene sulfide) (PPS)/poly(butylene terephthalate) (PBT) (60/40 w/w) blend nanocomposites (PPS/PBTs) were prepared by direct melt compounding of PPS, PBT and organoclay. The morphology and rheology of PPS/PBTs were investigated using scanning electron microscope (SEM) and transmission electron microscope ...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1439.html |
| |
Rheology of Isothermally Crystallized PBT Nanocomposites with Clay Loadings under the Percolation Threshold. Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 229-238.
Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 229-238.
ABSTRACT:
This paper describes the structural evolution of clay in the poly(butylenes terephthalate) nanocomposites (PCN) with lower clay loadings than percolation threshold during the isothermal crystallization process. The study of structure and rheological properties reveals that the intercalation and detachment level of ...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1434.html |
| |
Rheological Properties and Crystallization Behavior of Multi-Walled Carbon Nanotube/PCL Composites. Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 3137-3147.
Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 3137-3147.
ABSTRACT:
Multi-walled carbon nanotube/polycaprolactone composites (PCLCNs) were prepared by melt compounding. The rheology, nonisothermal crystallization behavior and thermal stability of PCLCNs were respectively investigated by the parallel plate rheometer, DSC and TGA. Cole-Cole plots were employed successfully to detec...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1433.html |
| |
Rheology of Multi-Walled Carbon Nanotube/PBT Composites. Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 2239-2251.
Journal of Polymer Science Part B: Polymer Physics, 2007, 45, 2239-2251.
ABSTRACT:
Multi-walled carbon nanotube/Poly(butylene terephthalate) nanocomposites (PCTs) were prepared by melt compounding. The microstructure of PCTs was investigated using TEM and FT-IR. The linear and nonlinear as well as transient rheological properties of PCTs were characterized by the parallel plate rheometer. The r...
http://www.polymer.cnt//ss/wudefeng/publicationsshow_1432.html |
| |
|