| |
Crystallization and Biodegradation of Polylactide/Carbon Nanotube Composites. Polymer Engineering & Science, 2010, 50, 1721-1733.
Polymer Engineering & Science, 2010, 50, 1721-1733.
ABSTRACT:
The crystallization behaviour of polylactide/carbon nanotube composites (PLANs) was studied using differential scanning calorimeter (DSC) and polarized optical microscope (POM). The nucleation mechanisms and the crystallization kinetics were then analyzed by both the isothermal and the nonisothermal methods. The results show that...
http://www.polymer.cn//ss/wudefeng/publicationsshow_1841.html |
| |
Induced crystallization and swelling behavior of polymer in supercritical Carbon Dioxide
暂无
http://www.polymer.cn//ss/caoguiping/publicationsshow_1699.html |
| |
High-throughput solubility measurements of polymer libraries in supercritical carbon dioxide.
A new method was developed which allows rapid parallel soly. measurements for libraries of materials in supercrit. fluids (SCFs). The technique was used to evaluate the soly. of a mixed library of 100 synthetic polymers including polyesters, polycarbonates, and vinyl polymers.
http://www.polymer.cn//ss/tanbien/publicationsshow_1560.html |
| |
Electrospinning and Crosslinking of Zein Nanofiber Mats, Journal of Applied Polymer Science, 2007, 103(1), 380–385.
.
http://www.polymer.cn//ss/lixs/publicationsshow_1504.html |
| |
Electrospinning of Zein/chitosan Composite Fibrous Membranes, Chinese Journal of Polymer Science, 2010, 28(2), 171－179
.
http://www.polymer.cn//ss/lixs/publicationsshow_1500.html |
| |
Biodegradable nanofibrous membrane of zein/silk fibroin by electrospinning, Polymer International, 2009, 58(4), 396 – 402.
.
http://www.polymer.cn//ss/lixs/publicationsshow_1498.html |
| |
Temperature dependence of surface composition and morphology in polymer blend film.
Thin films of poly(methyl methacrylate) (PMMA) and poly(styrene-ran-acrylonitrile) (SAN) blend can phase separate upon heating to above its critical temperature. Temperature dependence of the surface composition and morphology in the blend thin film upon thermal treatment was studied using in situ X-ray photoelectron spectroscopy (XPS) and in situ atomic force microscopy (AFM). It was found that i...
http://www.polymer.cn//ss/ygliao/publicationsshow_1481.html |
| |
Composition effect on dewetting of ultrathin films of miscible polymer blend.
Two kinds of dewetting and their transition induced by composition fluctuation due to different composition in blend [poly(methyl methacrylate) (PMMA) and poly(styrene-ran-acrylonitrile) (SAN)] films on SiOx substrate at 145 C have been studied by in-situ atomic force microscopy (AFM). The results showed that morphology and pathway of dewetting depended crucially on the composition. Possible reas...
http://www.polymer.cn//ss/ygliao/publicationsshow_1479.html |
| |
Fabrication of robust honeycomb polymer films: A facile photochemical cross-linking process
Highly ordered honeycomb films are prepared by breath-figure method using an amphiphilic diblock copolymer of polystyrene-block-polyacrylic acid (PS-b-PAA). By simply cross-linking PS matrix via deep ultraviolet (UV) irradiation, both the solvent and thermal stability of the porous films was significantly improved while retaining the three-dimensional (3D) structures. The film surface wettability ...
http://www.polymer.cn//ss/lilei/publicationsshow_1474.html |
| |
Effect of Epoxy Resin on Rheology of PC/Clay Nanocomposites. European Polymer Journal, 2007, 43, 1635-1644.
European Polymer Journal, 2007, 43, 1635-1644.
ABSTRACT:
Polycarbonate/clay nanocomposites (PCNs) were prepared by melt intercalation using epoxy resin as a compatibilizer. The intercalated structure of PCNs was investigated using XRD and TEM. The linear and nonlinear dynamic rheological properties of PCNs were measured by the use of a parallel plate rheometer. The results reveal that the prese...
http://www.polymer.cn//ss/wudefeng/publicationsshow_1430.html |
| |