| |
【Micro & Nano Letters】Influence of total gas flow on carbon nanotube forests synthesised by water-assisted chemical vapour deposition
The influence of total gas flow on the growth of carbon nanotube (CNT) forests in water-assisted chemical vapour deposition has been investigated. It was found that the average height of the CNT forests decreased gradually from 996.53 to 696.8 μm, and the growth yield decreased notably from 2.91 to 1.98 mg/cm 2 as the total flow increased, but the crystallinity and thermostability of CNT forest...
http://www.polymer.cn//ss/zhaobin/publicationsshow_13809.html |
| |
【Nanoscience and Nanotechnology Letters】Effects of Growth Temperature on Carbon Nanotube Forests Synthesized by Water-Assisted Chemical Vapor Deposition
Carbon nanotube (CNT) forests were synthesized at various temperatures between 805–830 °C by water-assisted chemical vapor deposition (CVD). The height and the yield of CNT forests increased about 3 times as the temperature rose, while the crystallinity improved slightly, which suggests that relatively high growth temperature was desirable for efficient growth of high-quality CNTs. Investigati...
http://www.polymer.cn//ss/zhaobin/publicationsshow_13808.html |
| |
【Nanoscale Research Letters】Temperature-dependent gas transport performance of vertically aligned carbon nanotube/parylene composite membranes
A novel composite membrane consisting of vertically aligned carbon nanotubes (CNTs) and parylene was successfully fabricated. Seamless filling of the spaces in CNT forests with parylene was achieved by a low-pressure chemical vapor deposition (CVD) technique and followed with the Ar/O2 plasma etching to expose CNT tips. Transport properties of various gases through the CNT/parylene membranes wer...
http://www.polymer.cn//ss/zhaobin/publicationsshow_13807.html |
| |
【Nanoscale Research Letters】Preparation and Transport Performances of High-Density, Aligned Carbon Nanotube Membranes
We report a simple and effective method for the preparation of high-density and aligned carbon nanotube (CNT) membranes. The CNT arrays were prepared by water-assisted chemical vapor deposition (CVD) and were subsequently pushed over and stacked into dense membranes by mechanical rolling. It was demonstrated that various gases and liquids, including H2, He, N2, O2, Ar, water, ethanol, hexane, an...
http://www.polymer.cn//ss/zhaobin/publicationsshow_13804.html |
| |
[Functional Materials Letters]Octahedron Shaped Lead Sulfide Nanocrystals as Counter Electrodes for Quantum Dot Sensitized Solar Cells[2018]
Tingting Xu*, Jinglu Hu, Pengli Wei, Xiulan Qin, Tao Huang, Lixin Chen, and Hongjing Wu*. “Octahedron Shaped Lead Sulfide Nanocrystals as Counter Electrodes for Quantum Dot Sensitized Solar Cells”. Functional Materials Letters, 2018, in press.
http://www.polymer.cn//ss/tingtingxu/publicationsshow_12701.html |
| |
Materials Letters-A novel“gel–sol” strategy to synthesize TiO2nanorod combining reduced graphene oxide composites
In this study, a novel so-called “gel–sol” process isfirstly reported for synthesis of TiO2nanorod (TN)
combining reduced graphene oxide (RGO) composites. By utilizing the triethanolamine (TEOA) as shape
controller and under specific conditions (such as pH?12), the hybrid composites can be readily obtained.
The higher pH value benefits the deprotonation of TEOA for adsorption to the ...
http://www.polymer.cn//ss/wangzhenxing/publicationsshow_11845.html |
| |
[Materials Letters]Superior Cu2S/brass-mesh electrode in CdS quantum dot sensitized solar cells for dual-side illumination[2017]
Tingting Xu*, Pengli Wei, Xiaopeng Ren, Hu Liu, Lixin Chen, Wei Tian, Shengzhong (Frank) Liu* and Zhanhu Guo*.
“Superior Cu2S/brass-mesh electrode in CdS quantum dot sensitized solar cells for dual-side illumination”, Materials Letters, 2017, 195, 100-103.
http://www.polymer.cn//ss/tingtingxu/publicationsshow_10023.html |
| |
【Materials Letters】Preparation of size-tunable, highly monodisperse particles by self-assembly of N-phthaloylchitosan-g-polycaprolactone molecular bottle brushes
A series of amphiphilic N-phthaloylchitosan-g-polycaprolactone (PHCS-g-PCL) molecular bottle brushes were prepared by "graft onto" method. The narrow distribution of polycaprolactone (PCL) side chains ensures that the molecular bottle brushes can self-assemble into particles with a narrow size distribution in aqueous solution. The size of the self-assembled polymeric particles can be tuned by thre...
http://www.polymer.cn//ss/huangyouju/publicationsshow_9237.html |
| |
Materials Letters, 2011, 65, 296-299; Wettable arrays onto superhydrophobic surfaces for bioactivity testing of inorganic nanoparticles,
Poly(l-lactic acid) superhydrophobic surfaces prepared by a phase-separation methodology were treated with 30 min exposition of UV/O3 irradiation using hollowed masks in order to obtain patterned superhydrophilic squared-shaped areas. These wettable areas successfully confined bioactive glass nanoparticles (BG-NPs), by dispensing and drying individual droplets of BG-NPs suspensions. The ...
http://www.polymer.cn//ss/songwenlong/publicationsshow_8518.html |
| |
Materials Letters, 2006, 60, 1629–1633. Multi-fluorescent dye-doped SiO2/ lanthanide complexes hybrid particles
In this paper, we have synthesized multi-fluorescent dye-doped SiO2/lanthanide complex hybrid particles, which provided a novel strategy for the design of the multi-fluorescent SiO2particles. The resultant hybrid particles were uniformly spherical in morphology and close to monodispersity. These hybrid particles exhibited the fluorescent properties of the dye-doped SiO2 and the lanthanide com...
http://www.polymer.cn//ss/songwenlong/publicationsshow_8508.html |
| |
|
|