首页
最新动态 交流合作 科研项目 论文著作 精彩瞬间 招生招聘
  • Fabrication on the annealed Ti3C2Tx MXene/epoxy nanocomposites for electromagnetic interference shielding application
  • 来源:王雷副教授个人网站 2023-03-28
  • Few-layered Ti3C2Tx MXene was fabricated by ionic intercalation and sonication-assisted method, followed by

    thermal reduction at medium-low temperature. Then annealed Ti3C2Tx/epoxy electromagnetic interference

    (EMI) shielding nanocomposites were obtained by solution casting method. XRD, SEM, AFM and TEM indicated

    the successful preparation of few-layered Ti3C2Tx. FTIR, XPS and XRD showed that thermal reduction removed

    partial polar groups on the surface of Ti3C2Tx with no by-product. For a fixed Ti3C2Tx loading, compared with

    Ti3C2Tx/epoxy EMI shielding nanocomposites, the annealed Ti3C2Tx/epoxy EMI shielding nanocomposites

    exhibited relatively higher electrical conductivity and excellent EMI shielding effectiveness (SE). When the mass

    fraction of annealed Ti3C2Tx was 15 wt%, the annealed Ti3C2Tx/epoxy EMI shielding nanocomposites presented

    the optimal electrical conductivity of 105 S/m and EMI SE of 41 dB, 176% and 37% higher than that of 15 wt%

    Ti3C2Tx/epoxy EMI shielding nanocomposites. Furthermore, the 5 wt% annealed Ti3C2Tx/epoxy EMI shielding

    nanocomposites exhibited the optimal Young’s modulus of 4.32 GPa and hardness of 0.29 GPa, respectively.


  • [来源:中国聚合物网]
  • 了解更多请进入: 王雷副教授个人网站
相关新闻
  • · Current advances and future perspectives of MXene-based electromagnetic interference shielding materials
  • · 3D Ti3C2Tx MXene/C hybrid foam/epoxy nanocomposites with superior electromagnetic interference shielding performances and robust mechanical properties
  • · Electromagnetic interference shielding MWCNT-Fe3O4@Ag/epoxy nanocomposites with satisfactory thermal conductivity and high thermal stability
  • · Lightweight and robust rGO/sugarcane derived hybrid carbon foams with outstanding EMI shielding performance

关于我们  |  联系我们  

网站:中国聚合物网

polymer.cn Copyright ©2017